Active-Semi Solutions for Sustainability
Chinese (Simplified)English

Product Features

  • Fully Programmable 50MHz Arm? Cortex? -M0
  • Integrated 56V/1.5A Gate Drivers
  • Integrated 44V DC/DC Buck or SEPIC Controller
  • Integrated PGA (3 Differential, 4 Single-ended)
  • Integrated DACs and Comparators
  • UART, I2C, SWD and SPI serial interfaces
  • Extremely low total hibernate mode
  • Minimal external components
  • 6x6mm, 48-pin QFN

The PAC5222 belongs to Active-Semi’s broad portfolio of full-featured Power Application Controller? (PAC) products that are highly optimized for controlling and powering next generation smart energy appliances, devices, and equipment. These?application controllers integrate a 50MHz Arm? Cortex?-M0 32-bit microcontroller core with Active-Semi’s proprietary and?patent-pending Multi-Mode Power Manager?, Configurable Analog Front End?, and Application Specific Power?Drivers? to form the most compact microcontroller-based motor control and drive solutions for BLDC and PMSM motors. The PAC5222 microcontroller features up to 32kB of embedded FLASH and 8kB of?SRAM memory, a high-speed 10-bit 1μs analog-to-digital converter (ADC) with dual auto-sampling sequencers, 5V/3.3V?I/Os, flexible clock sources, timers, a versatile 14-channel PWM engine, and several serial interfaces.


Advantages of our Intelligent Motor Control

Programmable 32-bit MCU Allows implementation of high-performance advanced control algorithms such as Field Oriented Control (FOC), Sensorless BEMF, Sensored BLDC and serial communications protocols
Integrated Power Manager Removes the need for an external DC/DC Controller. Provides 5V/200mA system supply for additional PCB peripherals. Integrates all power rails for MCU, FLASH, Analog and gate drivers
Integrated Gate Drivers Removes the need external open-drain driver circuits
Integrated Signal Chain Allows integrated Current, Voltage and Temperature sensing and protection using integrated Differential and Single-ended Programmable-Gain Amplifiers, comparators and DACs
Lowest standby power Allows 18μA Iq for standby-mode


Active-Semi’s PAC5222EVK1 development platform is a complete hardware solution enabling users not only?to evaluate the PAC5222 device, but also develop power applications revolving around this powerful and?versatile Arm? Cortex?-M0 based microcontroller. The module contains a PAC5222 Power Application Controller? (MCU) and all the necessary circuitry to properly energize the MCU and its internal peripherals once power is applied.
To aid in the application development the PAC5222EVK1 offers access to each and every one of the?PAC5222 device’s signals by means of a series of male header connectors.

PAC5222EVK1 User Manual

PAC5222EVK1 Schematics, Layout, BOM, Gerber Files and Altium Project

Supporting Evaluation Tools

五分快三计划The ET-UARTSWD adapter is the preferred adapter for evaluation of PAC devices/firmware and?combines a USB to UART adapter with SWD debugger connector adaptation into a single board with isolation. The?ET-UARTISO-1 adapter provides only the USB to UART adapter with isolation for Active-Semi application GUI?communications.


Buy it at these partners


The ET-UARTISO-1 adapter is a USB to UART adapter for Active-Semi application GUI communications with the?PAC device UART, and can be used for evaluation and debugging of PAC applications.
Buy it at these partners

PAC5xxx Flash Programmer Tools

Active-Semi has partnered with Flash Programmer solution providers to support our Intelligent Motor Control PAC product families.
These proven tools are suitable for emerging and high volume product manufacturing.
Both package level (socketed) and board level Flash programming solutions are available.

Active-Semi will support other vendors familiar with Arm? Serial Wire Debug (SWD) protocol to add PAC product compatibility on their existing Flash programmer platforms.

For more details contact

PAC52xx BLDC Application Firmware

五分快三计划Installer for the PAC52XX BLDC application firmware, which implements sensored BLDC and sensorless BEMF motor control on all members of the PAC52XX family.? The installer contains example application source code, Windows graphical user interface (GUI), and documentation to allow the user to configure the system to work with their target motor.? Project files for IAR Systems Embedded Workbench for ARM (EWARM) and Keil uVision are included.

Version: v2.3.0

Download Now!

PAC FOC Application Firmware

Installer for the PAC FOC application firmware designed to show case motor control using sensorless Field Oriented Control (FOC) on all PAC devices.? The installer contains example FOC application source code, Windows graphical user interface (GUI), and documentation to allow the user to configure the system to work with their target motor.?? Project files for IAR Systems Embedded Workbench for Arm? (EWARM), Keil uVision and Eclipse are included. The FOC application provides a?configurable set of features to meet many different application requirements such as sensorless position/speed estimator, start-in-motion (SIM), three or single shunt operation, open phase detection (OPD), field weakening and others.

Version: v4.1.2

Download Now!

PAC52xx Software Development Kit

五分快三计划Installer for the PAC52XX Software Development Kit (SDK) that provides register level definitions and peripheral driver APIs for developing ARM M0 application firmware on all PAC52XX devices.? The PAC52XX SDK is a unified SDK that supports Keil μVision IDE, IAR Systems Embedded Workbench for ARM (EWARM) IDE, and GCC tool chains.

Version: v2.6.1

Download Now!

PAC52XX Example Code

Installer for the PAC52xx Example Code that provides a simple source code example for getting started with the following IDE projects: Keil MDK (μVision), IAR Systems Embedded Workbench for ARM (EWARM), and Eclipse.

Version: 2019-05-03

Download Now!

PAC52xx IDE Support

Development of application firmware for PAC52XX Arm? Cortex? M0 is made easy with standard integrated development environments (IDEs). Several of the most popular IDEs contain support for PAC52XX devices including Keil uVision, and IAR Systems Embedded Workbench for Arm?. Eclipse development is possible using J-Link by downloading and installing the “Eclipse with PAC support” package.

PAC52XX Keil IDE Guide
Version: 2018-08-21

Download Now!

Guide for installing Keil uVision for development of PAC52XX application firmware.
Keil PAC52xx .pack v1.0.9 to v2.0.0 upgrade
Version: 2018-02-22

Download Now!

Guide for upgrading the Keil uVision PAC52XX pack from v1.0.9 to v2.0.0.
PAC IAR Support
Version: 2019-07-31

Download Now!

PAC IAR Systems Embedded Workbench IDE installation guide and patches.
Eclipse with PAC support
Version: v1.1.0 2019-03-27

Download Now!

Installer for Eclipse and supporting plugins for development on the PAC family of devices.
Segger J-Link Support
Version: 2019-10-23

Download Now!

PAC support files for Segger J-Link debuggers.

RD5222PT Battery operated Power Tool Reference Design

The RD5222PT reference design shows how the PAC5222 can be used to implement a highly-compact power tool with up to a 24V battery. This reference design includes the motor control and drive stages, hall sensor interface, thermistor, potentiometer and switches commonly used in this application.

RD5222PT Schematics, Layout, BOM, Gerber Files and Altium Project