- Fully Programmable 150MHz Arm? Cortex-M4F?
- Integrated 70V DC/DC Buck or SEPIC controller
- 128kB FLASH
- Integrated 70V/1.5A Gate Drivers
- Integrated PGA (3 Differential, 4 Single-ended)
- Integrated DACs and Comparators
- UART, CAN, I2C and SPI serial interfaces
- Extremely low total hibernate mode
- Minimal external components
- 8x8mm, 64-pin QFN
The PAC5524 belongs to Active-Semi’s Power Application Controller (PAC) family. The PAC family of products are highly-optimized SOC devices that can implement BLDC or PMSM programmable motor controller and driver in a single integrated IC. The PAC5524 integrates a high-performance, high-memory FLASH-based 150MHz Arm? Cortex-M4F?, Power Management , High-side and low-side Gate Drivers and Signal-Conditioning components in a single product.
五分快三计划The PAC5524 is optimized for high-performance battery-powered BLDC motor control applications up to 48V.
Advantages of our Intelligent Motor Control
|High-Performance, high-memory programmable 32-bit MCU||Allows implementation of high-performance advanced control algorithms such as Field Oriented Control (FOC), Sensorless BEMF, Sensored BLDC and serial communications protocols|
|Integrated Power Management||Removes the need for an external DC/DC Controller. Provides 5V/200mA system supply for additional PCB peripherals. Integrates all power rails for MCU, FLASH, Analog and gate drivers|
|Integrated Gate Drivers||3 integrated 70V/1.5A high-side and 3 integrated 1.5A low-side gate drivers for 3-phase inverters|
|Integrated Signal Chain||Allows integrated current, voltage and temperature sensing and protection using integrated Differential and Single-ended Programmable-Gain Amplifiers, comparators and DACs. Hardware-based cycle by cycle current limit|
|Lowest Standby Power||18μA Iq for standby-mode|
Active-Semi’s PAC5524EVK1 evaluation kit is a complete hardware solution enabling users to evaluate the PAC5524 device, but also develop motor control applications revolving around the powerful and versatile 150MHz Arm? Cortex? -M4F based MCU. This evaluation kit is a motor controller and driver evaluation PCB, that uses the PAC5524 Power Application Controller?五分快三计划. To aid in evaluation and application development the PAC5524EVK1 offers access to all of the PAC5524 device’s signals by means of a series of female header connectors.
Supporting Evaluation Tools
The ET-UARTSWD adapter is the preferred adapter for evaluation of PAC devices/firmware and combines a USB to UART adapter with SWD debugger connector adaptation into a single board with isolation. The ET-UARTISO-1 adapter provides only the USB to UART adapter with isolation for Active-Semi application GUI communications.
|Buy it at these partners|
|The ET-UARTISO-1 adapter is a USB to UART adapter for Active-Semi application GUI communications with the?PAC device UART, and can be used for evaluation and debugging of PAC applications.|
|Buy it at these partners|
PAC5xxx Flash Programmer Tools
Active-Semi has partnered with Flash Programmer solution providers to support our Intelligent Motor Control PAC product families.
These proven tools are suitable for emerging and high volume product manufacturing.
Both package level (socketed) and board level Flash programming solutions are available.
Active-Semi will support other vendors familiar with Arm? Serial Wire Debug (SWD) protocol to add PAC product compatibility on their existing Flash programmer platforms.
For more details contact email@example.com
Installer for the PAC55xx BLDC application firmware, which implements sensored BLDC and sensorless BEMF motor control on all members of the PAC55xx family.? The installer contains example application source code, Windows graphical user interface (GUI), and documentation to allow the user to configure the system to work with their target motor.? Project files for IAR Systems Embedded Workbench for ARM (EWARM) and Keil uVision are included.
Installer for the PAC FOC application firmware designed to show case motor control using sensorless Field Oriented Control (FOC) on all PAC devices.? The installer contains example FOC application source code, Windows graphical user interface (GUI), and documentation to allow the user to configure the system to work with their target motor.?? Project files for IAR Systems Embedded Workbench for Arm? (EWARM), Keil uVision and Eclipse are included. The FOC application provides a?configurable set of features to meet many different application requirements such as sensorless position/speed estimator, start-in-motion (SIM), three or single shunt operation, open phase detection (OPD), field weakening and others.
Installer for the PAC55XX Software Development Kit (SDK) that provides register level definitions and peripheral driver APIs for developing ARM M4 application firmware on all PAC55XX devices. The PAC55XX SDK is a unified SDK that supports Keil μVision IDE, IAR Systems Embedded Workbench for ARM (EWARM) IDE, and GCC tool chains.
Installer for the PAC55xx Example Code that provides source code examples for using the PAC55xx peripherals. IDE projects are provided for Keil MDK (μVision), IAR Systems Embedded Workbench for ARM (EWARM), and Eclipse.
PAC55xx IDE Support
Development of application firmware for PAC55XX ARM Cortex ?五分快三计划 M4 is made easy with standard integrated development environments (IDEs). PAC55XX can be used with the most popular integrated IDEs including Keil MDK(uVision), IAR Systems Embedded Workbench for ARM, and Eclipse.
|Support files for developing PAC55XX firmware with Keil MDK (uVision).|
PAC IAR Support
|Support files for developing PAC firmware with IAR Embedded Workbench for ARM|
Eclipse with PAC support
Version: v1.1.0 2019-03-27
|Installer for Eclipse and supporting plugins for development on the PAC family of devices.|
Segger J-Link Support
|PAC support files for Segger J-Link debuggers.|